Do you want to save money on your water bill, especially when it comes to your kitchen faucet? You should consider a low-pressure kitchen faucet with a Water Sense label that’s specifically designed to use less water, reduce water waste, and save money on your water bill.
In this PlumbingNav guide, we will cover:
What are the best low-pressure kitchen faucets?
What are the differenttypes of low-pressure faucets?
How does a low-pressure kitchen faucet work?
What should you look for in the best low-pressure kitchen faucet?
Best low-pressure kitchen faucet productsreviewed
Image
Product
Our Top Pick
Our Top Pick
KOHLER Artifacts® Pull Down kitchen sink faucet with Single Hole Install and lever handle
Flow Rate: 1.8 GPM @ 60 psi The pull-down sprayer head offers three different settings: sweep spray, soft spray, and aerated stream. The ball joint makes the sprayer easy to maneuver, and it goes back into place with magnetic docking technology.
The faucet is made from solid brass and has a stainless steel finish. It’s installed using one-hole installation.
Faucets that produce water at a lower pressure reduce the damage to your plumbing and your water heater, especially in households that use a lot of hot water and receive hard water.
Hard water creates sediment buildup faster than normal water or soft water since it has a much higher mineral content. The sediment buildup can create a blockage and possibly even a kitchen sink clog.
Kitchen faucets that generate water at a lower pressure rating also tend to also have a lower flow rate. A low flow rate means less water coming from the faucet, saving you money on your water bill.
Faucets with a Water Sense certification have a particularly efficient flow rate of 1.5 gallons per minute (GPM) or lower.
How to Fix Low Water Pressure
The best low pressure kitchen faucet will use the correct amount of pressure without reducing the pressure so much that it doesn’t clean effectively.
If you notice that your faucet has lower water pressure than you anticipated, you can take certain steps to fix the low water pressure.
Step One: Verify What Fixtures are Affected
Start by testing your different fixtures to learn if the low water pressure affects all of your fixtures or only one. Make sure to test the pressure with hot water and cold water so that you know if the problem is with your hot water heater.
Step Two: Check Water Pressure
If you notice that every single faucet seems to be affected by both hot water and cold water, there may be a problem with the pressure setting of the water coming into your home.
The most common setting for residential water pressure is 60 psi. You cannot legally set your home’s water pressure higher than 80 psi according to the federal building code, due to the damage that can be caused by high water pressure.
If your water pressure is lower than 60 psi, you may need to turn it up.
Step Three: Unclog Aerator
If only one faucet has a problem, you may have a clogged aerator thanks to sediment buildup and other debris. You should remove it and clean it thoroughly using water and white vinegar. Buying a new one is quick and easy. We love this one, and it’s super cheap.
Step Four: Examine For Leaks
Even small pinhole leaks can create a serious problem for your water pressure, and they can lead to high water bills. You will need to locate and resolve any leak affecting water entering your home.
Ideally, if you have a leak, it will be directly at the fixture. You can resolve the problem by replacing the faulty component and attaching the new one with silicone sealant.
Deeper leaks may require more extensive repairs that can get quite expensive.
What Are The Different Types Of Low-Pressure Kitchen Faucets?
Touch Faucets
Touch faucets allow you to turn the faucet on without using the handle by touching the base of the faucet with your closed hand or wrist. These faucets work by creating a minor electrical charge using battery power.
Touchless Faucets
Instead of a touch faucet that allows you to activate the faucet with touch that creates an electrical charge, touchless faucets use sensors. When the sensor picks up on you waving your hand, the faucet will turn on. Some touchless faucets use voice technology in addition to sensors.
How Does A Low-Pressure Kitchen Faucet Work?
Low-pressure kitchen faucets use an aerator or flow restrictor that helps produce a lower flow rate. The aerator adds air into the water stream so that you can barely notice the difference.
You will also control the water pressure yourself at the main water supply. In most cases, you will set the pressure at 60 psi.
If the water pressure appears too low, there are a number of actions you can take to ensure that you get adequate water pressure.
What Do You Look For In The Best Low Flow Kitchen Faucet?
Flow Rate
Since the flow rate correlates to the water pressure, you will check the flow rate to learn how much water a particular faucet produces.
The flow rate cannot exceed 2.5 gallons per minute (GPM). Al products under 1.5 GPM contain a Water Sense certification that guarantees you will save money on your water bills.
Installation
You need a faucet that will install easily based on your current setup.
In most cases, you have a choice between one-hole installation, three-hole installation, and four-hole installation. Oftentimes, a deck plate can allow a one-hole installation faucet to fit three holes. Four holes are best for bridge faucets that come with a sprayer or soap dispenser on the side.
Material
The material the faucet is made from will play a large role in how long it holds up. In most cases, you will find faucets made out of 304 stainless steel or solid brass as both materials are strong and resist corrosion.
Best Low-Pressure Faucets Reviewed
Now let’s explore our favorite units so you can decide on the perfect choice for your situation.
Flow Rate: 1.8 GPM @ 60 psi The pull-down sprayer head offers three different settings: sweep spray, soft spray, and aerated stream. The ball joint makes the sprayer easy to maneuver, and it goes back into place with magnetic docking technology.
The faucet is made from solid brass and has a stainless steel finish. It’s installed using one-hole installation.
Flow Rate: 1.75 @ 60 psi You won’t break the bank with this Kraus low-pressure kitchen faucet. A button allows you to switch between spray and stream mode.
It’s made from solid brass with a stainless steel finish, but you can choose between a number of different finishes. The stainless steel finish ensures that you won’t see water spots or fingerprints.
Flow Rate: 1.5 GPM @ 60 psi This touchless faucet has two sensors that activate the faucet when you have your hands full or need to wash your hands. The touchless features are powered by 6 AA batteries.
The power clean technology allows the sprayer to produce 50% more power than most other faucets.
Flow Rate: 1.5 GPM @ 60 psi This faucet generates water at 1.5 GPM. The high arch allows you to reach even more of your sink with your sprayer. The lever handle can be mounted on either the left or right side of the faucet, depending on your preference.
Flow Rate: 1.8 GPM @ 60 psi Made to last, this product comes with a rating of 500,000 uses before you should notice any problems. This faucet comes with Touch20 technology that makes cooking and cleaning even more convenient and sanitary for the entire household.
The sprayer has an extra-long 20” reach, and LED lights that indicate when the batteries need to be changed.
Pros
Touch20 technology
Extra-long sprayer reach
Batteries included
Cons
Some plastic components
Delayed shutoff
Not Water Sense certified
Final Thoughts On The Best Low Pressure Kitchen Faucets
Low-pressure kitchen faucets can be a great water-saving option if your plumbing system has higher PSI and you’re looking to reduce costs while aiding the environment.
Many of these options also have a spray head and additional features that make them especially useful, and wonderful additions to any kitchen.
Some kitchen faucets have low water flow and low water pressure, like the 5 faucets we review in this article.
How do you fix low pressure in kitchen faucet?
If you have lower pressure than anticipated, you can first try a new aerator. You can also fix the low pressure in the kitchen sink faucet by fixing any leaks and turning up the water pressure at the main supply line, or at your water heater.
What is a kitchen sink aerator?
A kitchen sink faucet aerator, or flow restrictor, reduces the amount of water flow coming from the faucet by mixing air into the water stream.
Meet Your Plumbing Navigator
About Plumbing Navigator
We’re passionate about all things plumbing, and love sharing tips, “how-to”, and reviewing the latest products to help make your project a success!
Learn More Plumbing Tips
Want to tackle more plumbing projects? Check out these helpful guides!
Got Plumbing Questions? Search For In-Depth Answers Below!
About Plumbing Navigator
We write about "all things plumbing," helping you navigate common questions, repairs, and the best plumbing products on the market.
About Plumbing Navigator
We write about “all things plumbing,” helping you navigate common questions, repairs, and the best plumbing products on the market.