What Causes Loss of Water Pressure in Bathroom Sink? Solved!

Last Updated On June 30, 2022
What Causes Loss of Water Pressure in Bathroom Sink (1)

Did you suddenly experience low water pressure coming from your bathroom sink? It can happen to even the best bathroom sink faucet. High water pressure makes washing hands and rinsing the sink much easier. 

When the pressure goes down, it may not provide the results you expect. Discovering the cause of the low-pressure problem and resolving it can get your bathroom sink functioning as normal again. 

In this PlumbingNav guide, we will cover:

  • Top causes for what causes loss of water pressure in bathroom sink only 
  • How to fix loss of water pressure in bathroom sink
  • Frequently asked questions

What's In This Guide?

      Top Causes for What Causes Loss of Water Pressure in Bathroom Sink Only

      In this article, we will be talking about the common reasons you may experience low water pressure in your bathroom sink. Keep in mind that we are referring to a loss of pressure related to your bathroom sink only and not throughout your entire home. This will be important as we discuss how to increase water pressure to the source. 

      Clogged Aerator

      An aerator is a small water flow regulator at the end of the spout. It controls how much water the faucet can produce at a time. Sometimes, they include air into the water so that the faucet generates the same water pressure while using less water. 

      Debris in your water can clog the aerator, making it more difficult for water to get through. 

      Clogged/Damaged Supply Line

      On occasion, the supply line to the faucet can have a clog in it. Your sink has two supply lines – one for hot water and one for cold water. If the problem is low hot water pressure, the problem may exist at the hot water heater. 

      If the water supply line has damage, a water leak may contribute to the problem. 

      You can identify a leak if you notice your water meter producing much higher numbers than normal in conjunction with the slow water flow. You can also run a hydrostatic pressure test.

      Partially Closed Shut Off Valve

      The shut off valve to your bathroom sink allows you to stop water from going to your bathroom sink when you perform maintenance and repairs on it. 

      If the valve is closed a bit of the way, it will deliver less water pressure. This will affect both the hot water and cold water.                                      

      How to Fix Loss of Water Pressure In Bathroom Sink

      When you notice that you have limited water pressure in your bathroom sink, there are some actions you can take to get preferred results.                  

      Clean Aerator 

      You can clean your aerator if you notice it has debris in it. 

      Remove the aerator and use your faucet to force the gunk out of the holes. Soak the aerator in vinegar overnight. Afterward, scrub it with a toothbrush or a sponge and rinse off completely before replacing it. See this post for tips on how to remove and clean a recessed faucet aerator

      For more detailed instructions, watch the video below to learn how to clean an aerator:

      In some cases, you may need to replace the aerator if you notice it has become damaged beyond repair. Find a new faucet aerator on Amazon or visit your local hardware store. 
      Want a really cool upgrade that will also solve low pressure at your bathroom sink? Install a universal splash filter faucet!

      Remove Flow Restrictor 

      One simple way to increase water pressure is to remove the flow restrictor in your faucet altogether. Keep in mind that when you remove the flow restrictor, you will also 

      Flush Supply Lines

      Flushing your supply lines is similar to drain cleaning but it affects your supply lines instead of your drain lines. 

      To flush your hot water lines, you may want to start at the source – your hot water heater. Connect a hose, and then open the drain valve and allow the water to drain. Then close the drain valve and fill the water heater tank back up again.

      Tankless units may require additional tools, such as a pump and a bucket. You can buy a tankless water heater flush kit for this. Keep in mind that if the problem exists in the hot water, you may have the problem throughout your whole house. 

      did you know What Causes Loss of Water Pressure in Bathroom Sink

      To flush the cold water lines, turn on all of the cold water faucets at high pressure. Flush your toilets while the faucets run. Allow the faucets to run for up to 10 to 20 minutes and ensure the water looks clear before shutting the water off. 

      Purchase a High-Pressure Faucet

      You can purchase a faucet specifically designed to produce water at a high water flow rate.

      These faucets use more water, sometimes making them less efficient. However, when you have the necessary pressure, you can finish up more quickly so you don’t leave the water running as long. 

      You can install a new faucet as a beginner DIY plumber, or you can enlist the help of a plumbing service. 

      For tips on how to install a bathroom faucet, see the video below:

      Want a high pressure faucet for the kitchen instead of the bathroom? Read out review of the best high pressure kitchen faucets.                                                                                       

      FAQs: Why Sudden Loss of Water Pressure In Bathroom Sink

      What causes a sudden loss of water pressure in bathroom sink only?

      Most often, you will be dealing with a clogged aerator if the problem only impacts your bathroom sink but not your kitchen sink or shower head

      There may also be a clog in the bathroom sink’s supply line or damage to the supply line. 

      Finally, the faucet may not produce water at pressure levels that meet your preferences. 

      Why is my water pressure occasionally so bad?

      Sometimes your water pressure will diminish due to environmental factors outside of your control, especially if you live in an area that experiences drought or low water reserve levels. 

      More often, the problem exists in your home at the plumbing fixture in question. 

      How do I fix the water pressure in my bathroom faucet?

      Check that your sink’s supply line is completely open and clean your aerator before anything else. If the problem persists, flush the supply lines. Finally, if you still can’t seem to resolve the issue, try a high-pressure bathroom faucet.

      Meet Your Plumbing Navigator

      Plumbing Navigator: plumbing advice

      About Plumbing Navigator

      We’re passionate about all things plumbing, and love sharing tips, “how-to”, and reviewing the latest products to help make your project a success!

      Learn More Plumbing Tips

      Want to tackle more plumbing projects? Check out these helpful guides!

      How To Get Rid Of Tree Roots In Sewer Line
      How To Clean Cast Iron Pipes
      ultimate guide to water heater timers
      Is Plumbing Pipe Recyclable

      Got Plumbing Questions? Search For In-Depth Answers Below!

      About Plumbing Navigator

      We write about "all things plumbing," helping you navigate common questions, repairs, and the best plumbing products on the market.

      About Plumbing Navigator

      We write about “all things plumbing,” helping you navigate common questions, repairs, and the best plumbing products on the market.

      Recently Published Guides